DENALI
Authorized dealer
DENALI CANsmart Controller - Harley-Davidson Sportster, Dyna, Softail, Touring, CVO & Trike
SKU: DNL.WHS.12300
$283.49
$314.99
$31.50 off
Free Shipping in 24 hrs
1
Fits over 60 Harley-Davidson models: Street Glide, Road Glide, Road King, Ultra, Sportster, Dyna, Softail, Touring, CVO and Trike. Full year list in Fitment below. Plugs into the diagnostic port.
?
Have a question?
You can't decide? Let us know.
Customer pays return shipping.
Why riders pick it
- Plugs straight into the Harley diagnostic port and gives you plug-and-play power and control of factory passing lamps, auxiliary lights, horns and brake lights, no relays, no splicing
- Four electronically fused circuits, 10 amps continuous and 25 amps peak each. Any circuit can run any accessory, or clean switched 12V for a GPS, phone or heated gear
- Over 35 settings driven from the bike's own switches: high/low sync with the high beam, three clicks of the trip switch for on/off, hold it three seconds to dim from 10 to 100 percent, flash-to-pass by pulsing the high beam
- Lights can cancel on the side you are signalling, or flash with the signal so your auxiliary lights double as turn signals, and modulate for daytime visibility
- Plug-and-play horn circuit runs a SoundBomb with no extra relay, and your passing lamps or aux lights strobe when you sound the horn, factory horn included
- Smart Brake reads bike speed off the CAN bus and lights your auxiliary brake light on deceleration, before you touch the lever, with four flash patterns including the California-legal one. Works with genuine Harley LED brake lights too
- Fits over 60 Harley models. Comes with two OEM passing lamp adapters plus EURO 5 and Deutsch connectors, and a pass-through cable is available if a fuel tuner already lives on the diagnostic port
Specs
BrandDENALI
CategoryLighting & Electrical
SKUDNL.WHS.12300
In the box
- CANsmart™ Controller
- (x2) 5.5ft Extension splitters
- (x2) OEM Passing Lamp Wiring Adapters
- 5ft SoundBomb Horn Extension Cable
- B6 Brake Light Wiring Adapter
- Zip-ties
- Adhesive Hook-and-Loop Fastener
- Micro USB Programming Cable
Details
The DENALI CANsmart Controller GEN II harnesses your Harley's CAN bus to make accessory installation drastically easier, plug-and-play power and integrated control of up to four accessories, with dozens of customizable settings managed right from your factory hand controls or the free CANsmart Accessory Manager software.
- Four 10-amp circuits (30A total) preprogrammed for two sets of DENALI lights, a SoundBomb horn, and a B6 auxiliary brake light, each reconfigurable to run any accessory or clean switched 12V power.
- Smart lighting control, independent on/off and dimming, high/low beam sync, flash-to-pass strobe, light modulation, cancel-with-turn-signal, and inverse hazard flashing.
- Smart Brake technology, reads vehicle speed in real time to trigger your auxiliary brake light during deceleration, before you touch the brake, with four flash patterns including a California-legal rate.
- Plug-and-play horn circuit, run a high-power horn with no added relay, plus strobe-with-horn conspicuity.
Compatibility: Harley-Davidson Sportster, Dyna, Softail, Touring, CVO, and Trike models with CAN bus electrical systems.
DENALI CANsmart Controller - Harley-D...
Check these out instead
This one isn't available right now, these are.