DENALI D7 Pro Premium Lighting Bundle with Crashbar Mounts for BMW R1200 & R1250 Series
Fits 11 models
- BMW R1200GS LC Adventure 2014-2019
- BMW R1200GS LC 2013-2018
- BMW R1200GS Rallye 2017-2017
- BMW R1200RS 2015-2019
- BMW R1200RT 2014-2018
- BMW R1200R 2015-2019
- BMW R1250GS Adventure 2019-2024
- BMW R1250GS 2019-2024
- BMW R1250RS 2020-2024
- BMW R1250RT 2019-2024
- BMW R1250R 2020-2024
?
Have a question?
You can't decide? Let us know.
Why riders pick it
- Dual-Beam Technology - Independent control (and dimming) of center flood beam, outer spot beam, or all-on hybrid beam
- One plug-in box powers and controls up to four accessories, two sets of lights, a horn and a brake light, with no relays and no splicing into the factory loom
- Four 10-amp circuits, 30 amps total. Any circuit can be reassigned to any accessory, or to clean switched 12V for a GPS, phone or heated gear
- Everything runs from the BMW WonderWheel: high/low sync with the high beam switch, on/off and day/night dimming for each light set, flash-to-pass by pulsing the high beam three times
- Lights cancel on the side you are signalling so they never drown out your indicator, and flash inversely with your hazards on the roadside
- Plug-and-play horn circuit runs a SoundBomb with no extra relay, and the lights strobe when you sound the horn, factory horn included
Specs
In the box
- 2x DENALI D7 PRO Light Pod+Lenses (Clear, Amber, Yellow) - Single
- 1x DENALI Clamp Light Mounts
- 1x DENALI CANsmart Controller - BMW R1200LC & R1250 Series
- 2x DENALI 54" Light Extension Cable
Details
Our Premium Lighting Bundle is the ultimate vehicle-specific driving light kit that was purpose-built to provide maximum lighting performance with unmatched control and customization via our CANsmart Accessory Controller. The kit features a pair of our D7 PRO Driving Lights, a vehicle-specific CANsmart Controller, a vehicle-specific upper light mount, and any additional wiring needed to guarantee an effortless plug-&-play installation.
The clever dual circuit design of the D7 PRO Driving Lights combined with our CANsmart Controller gives you full independent control of the center amber/yellow visibility circuit and outer white high beam circuit - it truly is two lights in one housing! The bundle is designed to split the left & right amber/yellow visibility circuits so they will flash in sync with your factory turn signals, while the outer white high beam circuit will operate together in sync with our bikes high & low beam at any intensity of your choice!
Note: This default configuration will use 3 of the 4 CANsmart circuits so you still have one available circuit remaining to add a horn, auxiliary brake light, or 2nd set of fender mounted forward driving lights.
Bundle Contents:
(2x) DNL.D7P.050 - D7 PRO Multi-Beam Driving Light Pod with Modular X-Lens System
(1x) LAH.00.10300.B - Driving Light Mount - Articulating Bar Clamp 21mm-29mm
(1x) DNL.WHS.11602 - CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series
(2x) DNL.WHS.059 - Driving Light Extension Cable - 54 inches
Note: Product bundles ship complete in a white box and will only show in stock if all components are available. All bundle components are also available for individual sale.
Check these out instead
This one isn't available right now, these are.